Ceiling Mount or chain suspension fittings suitable for warehouse, factory and similar areas.

Six Pack with it's greater light output for higher ceilings and Four Pack for lower mounting heights.

Simple installation when suspending the fitting is achieved because fittings are supplied with a rear access point where the contractor brings in the power cable negating the need for access into the fitting during the installation process.

When ceiling mounting then normal front access, via the hinged frame, is the method. Body manufactured from zinc coated steel finished in chemical and abrasion resistant white polyester powder coat.

Two versions available, one with a wire mesh behind a clear polycarbonate panel and the other with an aluminium egg crate louvre behind the panel.

Both Six and Four pack provide significant protection against physical damage. The polycarbonate panel ensures that in the unlikely event of lamp breakage glass is kept within fitting enclosure.

An optional hood can be provided to assist in the prevention of the build up of debris on the top of the fitting.

High frequency control gear with each pair of lamps on separate circuits for individual switching

Access to lamps for re-lamping by hinged frame secured by simple toggle latches
Eye bolts for chain suspension provided

Add suffix 8 for additional hood

3 hour duration Emergency facility on suspended versions add suffix 058  (separate battery box)

3 hour duration Emergency facility on surface versions require remote               battery pack add suffix M11458

Lighting Control & Energy Management System available

Note: Use spacers provided when mounting direct to ceiling

Supplied with lamp