Specification assists


A


Abrams

IP65/IK16. LED or Linear fluorescent.

Robust vandal and weather resistant fitting for non-cell prison applications. Suitable for wall or ceiling mounting. Slim profile zinc coated steel body finished in white polyester powder coat. Opal polycarbonate diffuser held against gasket by tamperproof screws.  Electronic control gear on removable tray with fused plug & socket connector block and night light. Provision for conduit entry in back, gaskets provided.

Abrams AL

IP65/IK16. LED or Linear fluorescent.

‘Safer cells’ certified ceiling mounted vandal and weather resistant fitting. UK Justice Department NOMS approved fitting with patented diffuser design. Zinc coated steel body finished in white polyester powder coat. Uniquely constructed patented burns test resistant diffuser.  Diffuser held against gasket with tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block including 3 level switching & night light. Provision for conduit entry in back, gaskets provided.

Antares

IP65. LED or linear fluorescent

Recessed sealed luminaire suitable for use in tough environments. Designed to prevent the ingress of dust and moisture when used within clean environments. Suitable for ceiling mounting. Zinc coated steel body finished in white polyester powdercoat. Clear prismatic polycarbonate diffuser held against steel frame by silicone gasket seal. Designed to suit concealed fix ‘Z’systems, will also accommodate exposed lay in-grid for either 24mm or 15mm ‘T’ section. Please note: stated IP rating apply from below only. Integral electronic control gear with fused terminal block.


Aztec

IP65/IK14. LED or 2D fluorescent.

Slim vandal & weather resistant bulkhead fitting. Control lens and diffuser provides a square distribution of light. Suitable for wall or ceiling mounting. Zinc coated steel body finished in black polyester powder coat. Clear prismatic polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back and sides, gaskets provided.


B


Basilica

IP66/IK16. LED only.

Contemporary and robust anti-ligature circular bulkhead with light output of 116 lm/W. Contemporary design with no ligature points to help prevent self harming. Attractive LED only fitting, providing uniform light distribution and impressive light output of up to 116 luminaire lumens per circuit watt. Suitable for wall or ceiling mounting. Smooth surfaces make cleaning easy to help maintain a bright welcoming environment. Aluminium die-cast body finished in smooth white polyester powder coat. Opal polycarbonate diffuser held in place with Resistorx tamper resistant screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back, gaskets provided. 5 year warranty (full product).

Bastion

IP65/IK16. LED or compact fluorescent.

Slim, strong bulkhead for both interior and exterior applications. Suitable for wall or ceiling mounting. Zinc coated steel body finished in black polyester powder coat. Opal polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back and ends, gaskets provided.

Bedhead AL

IP20/IK10. LED only.

Discrete anti-ligature fitting for secure healthcare applications. Adjustable 30° rotation in either direction and on/off switch for user convenience. Suitable for wall mounting. Aluminium body finished in matt white polyester powder coat. Clear diffuser held in place by frame. Integral electronic control gear with terminal block.



C


Centaur CEB100

IP67. LED only.

Adjustable spotlight for flexible illumination and projection. Die cast aluminium body and stainless steel mounting bracket finished in matt black polyester powder coat. Toughened clear glass diffuser set into stainless steel frame. Flexible options include coloured lamps & clear polycarbonate diffusers. Integral electronic control gear. Sealed and supplied with a 2 metre mains lead as standard.

Centaur CE150

IP67. LED only.

Robust in ground LED units suitable for walk and drive over. Die cast aluminium body finished in matt black polyester powder coat. Toughened clear glass diffuser set into stainless steel frame. Flexible options include sleeves, coloured lamps & clear polycarbonate diffusers. Integral electronic control gear. Sealed and supplied with a 2 metre mains lead as standard.

Centaur CEB150

IP67. LED only.

Adjustable spotlight for flexible illumination and projection. Die cast aluminium body and stainless steel mounting bracket finished in matt black polyester powder coat. Toughened clear glass diffuser set into stainless steel frame. Flexible options include coloured lamps & clear polycarbonate diffusers. Integral electronic control gear. Sealed and supplied with a 2 metre mains lead as standard.

Centaur CE200

IP67. LED only.

Robust in ground LED units suitable for walk and drive over. Die cast aluminium body finished in matt black polyester powder coat. Toughened clear glass diffuser set into stainless steel frames. Flexible options include sleeves, coloured lamps & clear polycarbonate diffusers. Integral electronic control gear. Sealed and supplied with a 2 metre mains lead as standard.

Centaur CEB200

IP67. LED only.

Adjustable spotlight for flexible illumination and projection. Die cast aluminium body and stainless steel mounting bracket finished in matt black polyester powder coat. Toughened clear glass diffuser set into stainless steel frame. Flexible options include coloured lamps & clear polycarbonate diffusers. Integral electronic control gear. Sealed and supplied with a 2 metre mains lead as standard.

Centaur CES100

IP67. LED only.

Robust in ground LED units suitable for walk and drive over. Die cast aluminium body finished in matt black polyester powder coat. Toughened clear glass diffuser set into stainless steel frame. Flexible options include coloured lamps & clear polycarbonate diffusers. Integral electronic control gear. Sealed and supplied with a 2 metre mains lead as standard.

Centaur CESB100

IP67. LED only.

Adjustable spotlight for flexible illumination and projection. Die cast aluminium body and stainless steel mounting bracket finished in matt black polyester powder coat. Toughened clear glass diffuser set into stainless steel frame. Flexible options include coloured lamps & clear polycarbonate diffusers. Integral electronic control gear. Sealed and supplied with a 2 metre mains lead as standard.

Centaur CES200

IP67. LED only.

Robust in ground LED units suitable for walk and drive over. Die cast aluminium body finished in matt black polyester powder coat. Toughened clear glass diffuser set into stainless steel frame. Flexible options include sleeves, coloured lamps & clear polycarbonate diffusers. Integral electronic control gear. Sealed and supplied with a 2 metre mains lead as standard.

Centaur CESB200

IP67. LED only.

Adjustable spotlight for flexible illumination and projection. Die cast aluminium body and stainless steel mounting bracket finished in matt black polyester powder coat. Toughened clear glass diffuser set into stainless steel frame. Flexible options include coloured lamps & clear polycarbonate diffusers. Integral electronic control gear. Sealed and supplied with a 2 metre mains lead as standard.

Centaur CER2010

IP67. LED only.

Robust in ground LED units suitable for walk and drive over. Die cast aluminium body finished in matt black polyester powder coat. Toughened clear glass diffuser set into stainless steel frame. Flexible options include sleeves, coloured lamps & clear polycarbonate diffusers. Integral electronic control gear. Sealed and supplied with a 2 metre mains lead as standard.

Centaur CERB2010

IP67. LED only.

Adjustable spotlight for flexible illumination and projection. Die cast aluminium body and stainless steel mounting bracket finished in matt black polyester powder coat. Toughened clear glass diffuser set into stainless steel frame. Flexible options include coloured lamps & clear polycarbonate diffusers. Integral electronic control gear. Sealed and supplied with a 2 metre mains lead as standard.

Centaur Escalator

IP65/IK8. LED only.

Robust and stylish recessed LED unit suitable for lighting escalators. Angled LEDs, optics and light bending film to give specific output to light escalator treads with reduced glare. Die cast aluminium body finished in matt black polyester powder coat. Toughened clear glass diffuser set into silver anodised aluminium bezel. Integral electronic control gear with fused terminal block. Sealed and supplied with a 2 metre mains lead as standard. Compliant with London Underground subsurface standard 1-085 (Section 12).

Clarion 1

IP65. LED only.

Recessed ceiling mounted LED fitting for interior or exterior applications. Die cast aluminium body and bezel finished in smooth white polyester powder coat. Printed glass diffuser and aluminium heat sink. Remote electronic control gear. Please note: stated IP rating apply from below only.

CirCore

IP54/IK12. LED  only.

Slim circular bulkhead fitting for interior or exterior applications. Die cast aluminium body finished in black polyester powder coat. Suitable for wall or ceiling mounting. Opal polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back, gaskets provided.

Centaur CE100

IP67. LED only.

Robust in ground LED units suitable for walk and drive over. Die cast aluminium body finished in matt black polyester powder coat. Toughened clear glass diffuser set into stainless steel frame. Flexible options include sleeves, coloured lamps & clear polycarbonate diffusers. Integral electronic control gear. Sealed and supplied with a 2 metre mains lead as standard.

Cove

IP43/IK10.  LED or linear fluorescent.

Slim profile linear fitting with a variety of mounting options. Extruded control lens engineered to provide optimum Light Output Ratio of up to 75%. Suitable for cornice or semi-recessed mounting. Zinc coated steel body finished in smooth white polyester powder coat. Injection moulded polycarbonate ends. Polycarbonate diffuser held by end caps and secured to body against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back, gaskets provided.

Centaur CE100

IP67. LED only.

Robust in ground LED units suitable for walk and drive over. Die cast aluminium body finished in matt black polyester powder coat. Toughened clear glass diffuser set into stainless steel frame. Flexible options include sleeves, coloured lamps & clear polycarbonate diffusers. Integral electronic control gear. Sealed and supplied with a 2 metre mains lead as standard.

Curve Wall Mount

IP54/IK12. LED only.

Slim bulkhead fitting for corridors and stairway applications. Suitable for wall mounting. Zinc coated steel body and die-cast aluminium end caps finished in matt silver polyester powder coat. Opal polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear. Provision for conduit entry in back, gaskets provided.

Cove Mini

IP54/IK12. LED only.

Slim bulkhead fitting for corridors and stairway applications. Suitable for wall mounting. Zinc coated steel body and die-cast aluminium end caps finished in matt silver polyester powder coat. Extruded opal polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear. Provision for conduit entry in back, gaskets provided.

Curso

IP65/IK14. LED only.

Recessed vandal and weather resistant circular fitting. Suitable for wall mounting. Die cast aluminium body finished in matt black polyester powder coat. Diffuser held against gasket by tamperproof screws. Integral electronic control gear. Provision for conduit entry in back, gaskets provided.

Curve VR

IP54/IK12. LED or linear fluorescent.

Reinforced fitting for surface ceiling mounting. Extruded control lens engineered to provide optimum Light Output Ratio of up to 75%. Suitable for ceiling mounting. Zinc coated steel body finished in black polyester powder coat. Die cast aluminium ends. Polycarbonate diffuser held by end caps and secured to body against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back and ends, gaskets provided.


D


Duomo

IP65/IK15. LED only.

Stylish and robust circular bulkhead with light output of up to 113 lm/W. Attractive LED only fitting, providing uniform light distribution and impressive light output of up to 113 luminaire lumens per circuit watt. Suitable for wall or ceiling mounting. Aluminium die-cast body finished in titanium polyester powder coat. Opal polycarbonate diffuser held in place with Resistorx tamper resistant screws. Electronic control gear on removable tray with fused plug and socket connector block. Provision for conduit entry in back, gaskets provided. 5 year warranty (full product)


F


Flair

IP65/IK16. LED or linear fluorescent.

Robust vandal and weather resistant linear fitting for interior or exterior use. Versatile fitting with easy installation and high LOR ratings. Suitable for ceiling or recessed mounting. Extruded aluminium body and die cast end caps finished in matt silver polyester powder coat. Clear polycarbonate diffuser and reflective louvre held against silicone gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back, gaskets provided.

Flair Angled

IP65/IK16. LED or linear fluorescent.

Angled vandal and weather resistant fitting for interior or exterior use. Versatile fitting with easy application and high LOR ratings. Suitable for wall mounting. Body finished in matt silver polyester powder coat. Clear polycarbonate diffuser held against silicone gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back, gaskets provided

Flair High Bay

IP54/IK8. LED only.

Suspended architectural LED High Bay fitting for use in public spaces or train maintenance areas. High output LED array (over 100 luminaire lumens per circuit watt) with efficient square symmetrical output. Zinc coated steel body finished in matt silver polyester powder coat. Diffusers and control gear cover retained with lanyards for ease of maintenance. Toughened glass cover, polycarbonate optics, silicone gasket. IP rated integral electronic control gear with fused terminal block housed in middle section for thermal separation. Standard drop length of 2 metres supplied with cable and suspensions. Compliant with London Underground subsurface standard 1-085 (Section 12).


FSRDL 2

IP55/IK11. LED only.

Fully sealed recessed round fitting suitable for interior applications. Suitable for surface or semi-recessed ceiling mounting. Aluminium body finished in smooth white polyester powder coat. Clear polycarbonate diffuser held against gasket by tamperproof screws. Integral electronic control gear with fused terminal block. Provision for conduit entry in back, gaskets provided.


G


Gemco

IP65/IK12. LED only.

Hard-wearing weather and vandal resistant rectangular fitting. Suitable for wall or ceiling mounting. Die cast aluminium body finished in black polyester powder coat. Opal polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back, gaskets provided. Available with exit legends to ISO 7010.

Gemini

IP54/IK14. LED only.

Robust vandal and weather resistant rectangular bulkhead fitting. Suitable for wall or ceiling mounting. Zinc coated steel body finished in black polyester powder coat. Opal polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back and at ends, gaskets provided. Available with exit legends to ISO 7010.

Gemini Metro

IP45/IK8. LED only.

Robust vandal and weather resistant fitting with emergency options. Compliant with London Underground subsurface standard 1-085 (Section12). Suitable for wall or ceiling mounting. Zinc coated steel body finished in white polyester powder coat. Frosted glass diffuser held against silicone gasket by socket cap stainless steel screws. Available with exit legends to ISO 7010. Options include emergency exit legend as well as integral maintained or non maintained emergency. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back and at ends, gaskets provided.


Geneva T5

IP43. Linear fluorescent only.

Batten linear fitting suitable for a variety of applications and sectors. Outstanding photometric performance from diffuser minimising interlamp losses. Zinc coated steel body and polycarbonate end caps finished in smooth white polyester powder coat. Clear prismatic polycarbonate diffuser held by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back and ends, gaskets provided.


I


Inset

IK12. LED only.

Slim weather and vandal resistant linear fitting for indoor walkway applications. Unobtrusive fitting for lighting of internal stairs, ramps and similar applications. Can also be used as indoor under soffit or cove lighting. Varying outputs can be used for general illumination or accent lighting. Anodised aluminium body/heat sink, finished in matt silver or matt black polyester powder coat. Polycarbonate optic/diffuser, silicone gaskets. Stainless steel ends / fixing brackets. Remote electronic control gear. Various lengths, finishes, optics and outputs available.


M


Maxi Callisto

IP65/IK14. LED only.

Decorative vandal and weather resistant box fitting. Can be mounted to provide either upwards or downwards illumination. Suitable for interior or exterior use. Die cast aluminium body and hood finished in titanium polyester powder coat. Clear polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back, gaskets provided.

Miniquad

IP54/IK14. LED or 2D fluorescent.

Discrete vandal and weather resistant bulkhead fitting. Surface, and semi recessed versions available. Suitable for wall or ceiling mounting. Zinc coated steel body finished in black polyester powder coat. Polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back and side, gaskets provided.

Miniquad AL

IP54/IK14. LED only.

Discrete anti-ligature vandal and weather resistant bulkhead fitting. Optional tamperproof rockerswitch for switching locally. Suitable for wall mounting. Zinc coated steel body finished in white polyester powder coat. Polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back, gaskets provided.


Mission Bulkhead

IP65/IK16. LED only.

Robust surface mounted weather and vandal resistant bulkhead fitting. Suitable for wall or ceiling mounting. Extruded aluminium body and die cast aluminium end caps finished in matt silver polyester powder coat. Opal polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back, gaskets provided.

Mission

IP65/IK16. LED or linear fluorescent.

Versatile lighting for urban and transport applications. Ideal for rail applications, as well as car parks and urban areas. Suitable for ceiling, cornice or suspended mounting. Extruded aluminium body finished in matt silver polyester powder coat. Opal or prismatic polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Cable management rear housing available. Provision for conduit entry in back, gaskets provided.

Mission S12

IP65/IK10. LED only.

Designed specifically for subsurface rail applications. Designed with engineers who regularly specify for London Underground projects. Compliant with London Underground subsurface standard 1-085 (Section 12) including low smoke, zero halogen cables and control gear. Suitable for surface mounting. Extruded aluminium body and die cast aluminium end caps finished in RAL9010 or matt silver polyester powder coat. Toughened laminated glass diffuser held against silicone gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back, gaskets provided.


Mission CMS

LED or linear fluorescent.

Versatile cable management system designed specifically for rail. Ideal for platform applications where vandalism or particulate ingress is a concern. LED and linear fluorescent options. Versatile mounting options including suspended or surface mounting. Other options include speakers, dummy bodies, infill panels, cameras, sensors, PA and CCTV.

Monitor

IP65/IK16. LED or linear fluorescent.

Very strong ceiling mounted vandal and weather resistant linear fitting. Vandal resistant control lens provides excellent light distribution. Extruded aluminium body finished in black polyester powder coat. Opal or prismatic polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back, gaskets provided.


P


Pantheon

IP65/IK14. LED only.

Elegant vandal and weather resistant fitting for building perimeters. Aluminium reflector and control lens provide efficient, even distribution of light. Die cast aluminium body finished in matt black polyester powder coat. Opal or prismatic polycarbonate diffuser held against gasket by hinged overhead catch. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back, gaskets provided.

Parkalux

IP54/IK14. LED or linear fluorescent.

Versatile vandal and weather resistant linear fitting. Suitable for ceiling and semi recessed mounting. Zinc-coated steel body finished in black polyester powder coat. Opal or patterned polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back and at ends, gaskets provided.

Parkalux Angled

IP54/IK14. LED or linear fluorescent.

Versatile vandal and weather resistant linear fitting. Suitable for wall and cornice mounting. Zinc-coated steel body finished in black polyester powder coat. Opal or patterned polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back and at ends, gaskets provided.


Q


QuadEvo

IP65/IK15. LED only.

Contemporary, robust bulkhead fitting – the evolution of our Quadrant range. Attractive LED only fitting with uniform light distribution and 104 luminaire lumens per circuit watt. Circa 85% efficacy increase and 60% load reduction versus equivalent 28W 2D fitting, providing increased illumination for less energy. Suitable for wall and ceiling mounting. Die cast aluminium body finished in titanium polyester powder coat. Opal polycarbonate diffuser held against gasket by tamper proof Resistorx screws. Electronic control gear on removable tray with fused plug and socket connector block. Provision for conduit entry in back and options for side cable entry. 5 year warranty (full product).

Quadrant

IP54/IK14. LED or 2D fluorescent.

Vandal and weather resistant bulkhead fitting for wall mounting. Widely specified for external social housing applications. Zinc coated steel body finished in black polyester powder coat. Opal or clear polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back and at ends, gaskets provided.

QuadRETRO

LED only.

Service pack enabling you to upgrade your existing Quadrant 2D luminaire to an energy saving LED version in under 90 seconds. Replacement gear tray reducing the energy use of existing Quadrant installations. Improved luminous efficacy. Significant reduction to maintenance. Quick and simple to install (see below). BS EN 60598-1 compliant.


Quadrangle

IP54/IK14. LED and compact fluorescent.

Vandal and weather resistant angled fitting for wall mounting. Zinc coated steel body finished in black polyester powder coat. Polycarbonate diffuser held against a gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back and at ends, gaskets provided.

Quadrato

IP65/IK16. LED only.

Downlighting wall mounted weather and vandal resistant fitting. Die cast aluminium body and hood finished in matt black polyester powder coat. Opal polycarbonate diffuser secured with glazing frame. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back, gaskets provided.

Quadriga

IP65/IK16. LED only.

Vandal and weather resistant fitting for exterior applications. Suitable for wall or ceiling mounting. Die cast aluminium body finished in matt black polyester powder coat. Opal polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back, gaskets provided


Quadring

IP65/IK14. LED or 2D fluorescent.

Round vandal and weather resistant bulkhead fitting for wall mounting. Die cast aluminium body finished in black polyester powder coat. Opal or prismatic polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back, gaskets provided.

Quantum

IP65/IK16. LED only.

Hooded circular weather and vandal resistant fitting. Flexible options for installation include surface or semi-recessed versions. Suitable for wall mounting. Die cast aluminium body finished in titanium polyester powder coat. Opal polycarbonate diffuser held against a gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back, gaskets provided


R


RDL

IP55/IK11. LED only.

Ceiling recessed round fitting suitable for interior applications. Suitable for ceiling mounting. Heavy duty steel spinning finished in black polyester powder coat. Clear polycarbonate diffuser held against gasket by tamperproof screws. Remote electronic control gear. Please note: stated IP rating applies from below only.

RDL AL

IP55/IK13. LED only.

Sealed round downlight suitable for secure accommodation. Sealed with a mastic compound and increased impact rating to make it suitable for anti-ligature applications. Suitable for recessed ceiling mounting. Heavy duty steel spinning finished in smooth white polyester powder coat. Opal polycarbonate diffuser held against gasket by tamperproof screws. Remote electronic control gear. Please note: stated IP rating applies from below only.


S


Scipio

IP21. LED only.

Versatile fitting for a variety of interior applications. Simple linear fitting designed in conjunction with London Underground engineers for subsurface rail. Suitable for ceiling mounting. Zinc coated steel body finished in white polyester powder coat. Optional wire lamp guard, contact technical sales. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back, gaskets provided.

SDL

IP55/IK11. LED only.

Ceiling recessed square fitting suitable for interior applications. Suitable for ceiling mounting. Heavy duty steel frame finished in black polyester powder coat. Clear polycarbonate diffuser held against gasket by tamperproof screws. Remote electronic control gear. Please note: stated IP rating applies from below only.

SDL AL

IP55/IK13. LED only.

Sealed square downlight suitable for secure accommodation. Sealed with a mastic compound and increased impact rating to make it suitable for anti-ligature applications. Suitable for recessed ceiling mounting. Heavy duty steel frame finished in smooth white polyester powder coat. Opal polycarbonate diffuser held against gasket by tamperproof screws. Remote electronic control gear. Please note: stated IP rating applies from below only.


SquareCore

IP54/IK12. LED only.

Slim square bulkhead fitting for interior or exterior applications. Die cast aluminium body finished in black polyester powder coat. Suitable for wall or ceiling mounting. Opal polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back, gaskets provided.


T


Talos Beam

IP65/IK16. LED only.

Weather and vandal resistant LED bollard with impressive light output of 100 lm/W. Specifically designed optics to provide up to 8 metre spacings on typical pathway applications (15 lux average and 0.25 uniformity). Tested to withstand crowd loading up to 1.5kN/m. Minimal upward light. Die cast aluminium body and bollard finished in titanium polyester powder coat. Opal or clear polycarbonate diffuser held against gasket by tamper proof screws. Electronic control gear on removable tray with fused plug and socket connector block. Root mounting brackets and base plate supplied. Optional photocell.

Talos Pollare

IP65/IK16. LED only.

Weather and vandal resistant LED bollard with impressive light output of 100 lm/W. Specifically designed optics to provide up to 8 metre spacings on typical pathway applications (15 lux average and 0.25 uniformity). Tested to withstand crowd loading up to 1.5kN/m. Minimal upward light. Die cast aluminium body and bollard finished in titanium polyester powder coat. Opal or clear polycarbonate diffuser held against gasket by tamper proof screws. Electronic control gear on removable tray with fused plug and socket connector block. Root mounting brackets and base plate supplied. Optional photocell.

Talos Post Top

IP65/IK10. LED only.

Vandal and weather resistant post top fitting with zero upward light. High energy efficiency fitting with zero upward light. Die cast aluminium body and front panel finished in titanium polyester powder coat. Clear diffuser held against gasket by tamperproof screws. Easy maintenance fitting with hinged front panel. Matching 60mm and 76mm posts available. Electronic control gear on removable tray with fused plug & socket connector block.


Talos Wall

IP65/IK16. LED only.

Elegant and versatile bulkhead for wall mounted perimeter applications. Attractive LED specific fitting with light output of over 70 lm/W. Minimal upward light. Die cast aluminium body finished in titanium polyester powder coat. Frosted or opal polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Optional photocell. Provision for conduit entry in back, gaskets provided.

Talos Wall Max

IP65/IK16. LED only.

Elegant and versatile bulkhead fitting for high perimeter wall applications. Attractive LED specific fitting with light output of over 70 lm/W. Minimal upward light. Die cast aluminium body finished in titanium polyester powder coat. Frosted or opal polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Optional photocell. Provision for conduit entry in back, gaskets provided.

Terminus

IP65/IK12. LED only.

Recessed weather and vandal resistant downlighter. Fully sealed robust downlighter for use in transport, social housing and urban applications. Light output is over 90 lumens per watt with a high CRI of over 90. Suitable for recessed ceiling mounting. Die cast aluminium body finished in titanium polyester powder coat. Clear polycarbonate diffuser. Remote electronic control gear with fused terminal block. Provision for conduit entry, gaskets provided.


Terminus Surface

IP65/IK12. LED only.

Cylindrical sealed weather and vandal resistant downlighter. Fully sealed robust downlighter for use in transport, social housing and urban applications. Light output is over 90 lumens per watt with a high CRI of over 90. Suitable for ceiling mounting. Die cast aluminium body finished in titanium polyester powder coat. Clear polycarbonate diffuser. Integral electronic control gear with fused terminal block.

Terminus Wall

IP65/IK12. LED only.

Decorative cylindrical fitting for wall mounted applications. Robust, elegant fitting with an option for upward and downward light projection. Light output is over 90 lumens per watt with a high CRI of over 90. Suitable for wall mounting. Die cast aluminium body finished in titanium polyester powder coat. Clear polycarbonate diffuser. Integral electronic control gear with fused terminal block. Provision for conduit entry via mounting bracket, gaskets provided.

Torino

IP21/IK10. LED only.

Wall or ceiling mounted fitting particularly suited for housing. Steel spinning and fixing plate finished in matt white polyester powder coat. Opal polycarbonate diffuser held against body by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back.


Torino AL

IP44/IK14. LED only.

Wall or ceiling mounted fitting suitable for secure accommodation. Attractive fitting ideal for bedrooms and other areas. Steel spinning and fixing plate finished in matt white polyester powder coat. Opal polycarbonate diffuser held against body by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back.

Tuscan Trunking

LED or linear fluorescent.

Versatile trunking system with a variety of options available. LED and linear fluorescent options. Dummy bodies and infill panels available. Each application is unique and will be catered to your requirements. For further information contact our technical sales office on 020 8254 2022.

Tuscan 88

IP65/IK16. LED or linear fluorescent.

The market leading weather and vandal resistant fitting. Designed to resist extreme physical attack. Applications include subways, platforms and pedestrian walkways. Suitable for wall and ceiling mounting. Heavy gauge steel body finished in black polyester powder coat. Polycarbonate diffuser held against gasket with tamperproof screws. Dummy bodies and infill panels available for continuous mounting, please contact technical sales. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back and ends, gaskets provided.


Tuscan 88 Angled

IP65/IK16. LED or linear fluorescent.

The market leading weather and vandal resistant fitting. Designed to resist extreme attack. Applications include subways, platforms and pedestrian walkways. Suitable for cornice mounting at either 45° or 30°/60° angles. Heavy gauge steel body finished in black polyester powder coat. Polycarbonate diffuser held against gasket with tamperproof screws. Dummy bodies and infill panels available for continuous mounting, please contact technical sales. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back and ends, gaskets provided.

Tuscan 89

IP65/IK16. LED or linear fluorescent.

The market leading weather and vandal resistant fitting. Designed to resist extreme physical attack. Applications include subways, platforms and pedestrian walkways. Suitable for wall and ceiling mounting. Heavy gauge steel body finished in black polyester powder coat. Polycarbonate diffuser held against gasket with tamperproof screws. Dummy bodies and infill panels available for continuous mounting, please contact technical sales. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back and ends, gaskets provided.

Tuscan 89 Angled

IP65/IK16. LED or linear fluorescent.

The market leading weather and vandal resistant fitting. Designed to resist extreme attack. Applications include subways, platforms and pedestrian walkways. Suitable for cornice mounting at either 45° or 30°/60° angles. Heavy gauge steel body finished in black polyester powder coat. Polycarbonate diffuser held against gasket with tamperproof screws. Dummy bodies and infill panels available for continuous mounting, please contact technical sales. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back and ends, gaskets provided.


Tuscan AL

IP65/IK16. LED or linear fluorescent.

Extremely tough specialised fitting for in-cell applications. Specialised anti-ligature fitting for police cell applications and designed to resist extreme physical attack. Suitable for surface or recessed ceiling mounting. Heavy gauge steel body finished in white polyester powder coat. Polycarbonate diffuser held against gasket with tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Night light provision available. Provision for conduit entry in back, gaskets provided.

Tuscan II

IP65/IK16. LED only.

Robust weather and vandal resistant bulkhead fitting. Suitable for wall mounting. Zinc coated steel body finished in black polyester powder coat. Polycarbonate diffuser sealed into frame by gasket and held in place by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back and ends, gaskets provided.

Tuscan S12

IP65/IK8. LED only.

Specialised fitting designed for subsurface rail applications. Designed with engineers who regularly specify for London Underground. Compliant with London Underground subsurface standard 1-085 (Section 12) including low smoke and zero halogen control gear/cables. Suitable for surface or recessed ceiling mounting. Heavy gauge steel body finished in black polyester powder coat. Toughened glass diffuser sealed into frame by silicone gasket and held in place by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back and ends, gaskets provided.



U


Uni-Cell

IP65/IK16. LED or linear fluorescent.

Extremely robust NOMS compliant cell lighting and trunking system. A versatile, specialist anti-ligature fitting for police and custodial cell applications with options for CCTV, ventilation, smoke detectors and speakers. For further information contact our technical sales office on +44 (0)20 8254 2022. Available in NOMS Category 1, NOMS Category 3 (standard) and police cell versions. Only fitting to be NOMS Category 1. Suitable for cornice mounting. Heavy gauge zinc coated steel body finished in white polyester powder coat. 6mm burns test compliant Fybagard diffuser held against gasket with tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in ends, gaskets provided.


V


Vertigo

IP65/IK16. LED only.

Elliptical surface weather and vandal resistant fitting. Suitable for wall mounting. Die cast aluminium body and hood finished in titanium polyester powder coat. Opal polycarbonate diffuser secured by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back, gaskets provided.


W


Wall Mount Quad

IP54/IK14. LED or 2D fluorescent.

Surface weather and vandal resistant fitting ideal for exterior applications. Suitable for wall mounting. Zinc coated steel body finished in black polyester powder coat. Opal or prismatic polycarbonate diffuser held against gasket by tamperproof screws. Electronic control gear on removable tray with fused plug & socket connector block. Provision for conduit entry in back and at ends, gaskets provided.