Products

Mission Class II

  • Reset Filter

  • Product Type

  • IK Rating

  • IP Rating

  • High Temperature

  • Anti-Ligature

  • Section 12

  • RGBW

  • Control Method

  • Electrical Class

  • Sectors

Mission Class II Image
Mission Polar Curve
MISSION-LINEAR-CATALOGUE-DRAWINGS
Mission Class II vandal resistant luminaire is a versatile light for indoor and outdoor applications.
  • ENEC certified.
  • Available with 10kV surge protection device and in-rush current limiter.
  • Ideal for rail applications, as well as car parks and urban areas.
  • Impact resistance rating: IK16 (150 joules of energy).
  • Ingress protection rating: IP65.
  • Suitable for ceiling, cornice or suspended mounting.
  • Extruded aluminium body finished in matt silver polyester powder coat.
  • Opal polycarbonate diffuser held against silicone gasket by tamperproof screws.
  • Electronic control gear on removable tray.
  • Cable management rear housing available.

Technical Information

L703mm x W235mm x H95mm
LED, Opal Diffuser Temp Load Lum/lm Efficacy CRI Weight HT
D599-2-1600N-MW-CA 4000K 15W 1620lm 108lm/W CRI>80 6kg 45°C
D599-2-2300N-MW-CA 4000K 23W 2359lm 103lm/W CRI>80 6kg 45°C
L1303mm x W235mm x H95mm
LED, Opal Diffuser Temp Load Lum/lm Efficacy CRI Weight HT
D599-4-2000N-MW-CA 4000K 21W 2089lm 100lm/W CRI>80 8.5kg 45°C
D599-4-3200N-MW-CA 4000K 32W 3263lm 102lm/W CRI>80 8.5kg 45°C
D599-4-4100N-MW-CA 4000K 40W 4106lm 103lm/W CRI>80 8.5kg 45°C
L1603mm x W235mm x H95mm
LED, Opal Diffuser Temp Load Lum/lm Efficacy CRI Weight HT
D599-5-4000N-MW-CA 4000K 36W 4083lm 113lm/W CRI>80 10kg 45°C
D599-5-5900N-MW-CA 4000K 55W 5939lm 108lm/W CRI>80 10kg 45°C

HT Applies for standard version. For any options please check with technical sales.

Mission Class II contains a light source of energy efficiency class C (4000K) and class E (3000K).

Mission Class II LED Lifetime L70B10>110,000h (4000K), L70B10>100,000h (3000K) at 25oC ambient.

Mission Class II Driver Lifetime up to 100,000h at 25oC ambient.

Fitting Options

Matt silver Replace -MW with -MS
Class II with surge protection & in-rush current limiter Replace -CA with -CB
Class II with surge protection Replace -CA with -CC
Class II with in-rush limiter Replace -CA with -CD
Emergency luminaire monitoring module (CEAG)* Add suffix -EC
DALI Add suffix -DA
Warm white LEDs (3000K) Replace N with W

*Note:

-EC option not compatible with -CB or -CD options.
-EC option is only available on the following versions:
GD599-4-2000N-
GD599-4-3200N-
GD599-5-4000N-

Mission Class II vandal resistant luminaire is a versatile light for indoor and outdoor applications.


Sectors

, ,

Standard Colours


More colours including RAL codes CLICK HERE


Downloads

PDF Datasheet LDT BIM IES Specification Assists DofC

Mission Class II

Mission Class II vandal resistant luminaire is a versatile light for indoor and outdoor applications.
  • ENEC certified.
  • Available with 10kV surge protection device and in-rush current limiter.
  • Ideal for rail applications, as well as car parks and urban areas.
  • Impact resistance rating: IK16 (150 joules of energy).
  • Ingress protection rating: IP65.
  • Suitable for ceiling, cornice or suspended mounting.
  • Extruded aluminium body finished in matt silver polyester powder coat.
  • Opal polycarbonate diffuser held against silicone gasket by tamperproof screws.
  • Electronic control gear on removable tray.
  • Cable management rear housing available.

Mission Class II vandal resistant luminaire is a versatile light for indoor and outdoor applications.

Sectors

, ,

Finishes


Technical Information

L703mm x W235mm x H95mm
LED, Opal Diffuser Temp Load Lum/lm Efficacy CRI Weight HT
D599-2-1600N-MW-CA 4000K 15W 1620lm 108lm/W CRI>80 6kg 45°C
D599-2-2300N-MW-CA 4000K 23W 2359lm 103lm/W CRI>80 6kg 45°C
L1303mm x W235mm x H95mm
LED, Opal Diffuser Temp Load Lum/lm Efficacy CRI Weight HT
D599-4-2000N-MW-CA 4000K 21W 2089lm 100lm/W CRI>80 8.5kg 45°C
D599-4-3200N-MW-CA 4000K 32W 3263lm 102lm/W CRI>80 8.5kg 45°C
D599-4-4100N-MW-CA 4000K 40W 4106lm 103lm/W CRI>80 8.5kg 45°C
L1603mm x W235mm x H95mm
LED, Opal Diffuser Temp Load Lum/lm Efficacy CRI Weight HT
D599-5-4000N-MW-CA 4000K 36W 4083lm 113lm/W CRI>80 10kg 45°C
D599-5-5900N-MW-CA 4000K 55W 5939lm 108lm/W CRI>80 10kg 45°C

HT Applies for standard version. For any options please check with technical sales.

Mission Class II contains a light source of energy efficiency class C (4000K) and class E (3000K).

Mission Class II LED Lifetime L70B10>110,000h (4000K), L70B10>100,000h (3000K) at 25oC ambient.

Mission Class II Driver Lifetime up to 100,000h at 25oC ambient.

Fitting Options

Matt silver Replace -MW with -MS
Class II with surge protection & in-rush current limiter Replace -CA with -CB
Class II with surge protection Replace -CA with -CC
Class II with in-rush limiter Replace -CA with -CD
Emergency luminaire monitoring module (CEAG)* Add suffix -EC
DALI Add suffix -DA
Warm white LEDs (3000K) Replace N with W

*Note:

-EC option not compatible with -CB or -CD options.
-EC option is only available on the following versions:
GD599-4-2000N-
GD599-4-3200N-
GD599-5-4000N-

Mission Polar Curve
MISSION-LINEAR-CATALOGUE-DRAWINGS

Tel: +44 (0) 20 8254 2000 - Fax: +44 (0) 20 8644 4253 - sales@designplan.co.uk
www.designplan.co.uk Designplan Lighting Ltd, 16 Kimpton Park Way, Sutton, SM3 9QS
Registered in England No 784246

Mission Class II

Mission Class II vandal resistant luminaire is a versatile light for indoor and outdoor applications.

Sectors

, ,

Finishes


Mission Class II vandal resistant luminaire is a versatile light for indoor and outdoor applications.
  • ENEC certified.
  • Available with 10kV surge protection device and in-rush current limiter.
  • Ideal for rail applications, as well as car parks and urban areas.
  • Impact resistance rating: IK16 (150 joules of energy).
  • Ingress protection rating: IP65.
  • Suitable for ceiling, cornice or suspended mounting.
  • Extruded aluminium body finished in matt silver polyester powder coat.
  • Opal polycarbonate diffuser held against silicone gasket by tamperproof screws.
  • Electronic control gear on removable tray.
  • Cable management rear housing available.

Technical Information

L703mm x W235mm x H95mm
LED, Opal Diffuser Temp Load Lum/lm Efficacy CRI Weight HT
D599-2-1600N-MW-CA 4000K 15W 1620lm 108lm/W CRI>80 6kg 45°C
D599-2-2300N-MW-CA 4000K 23W 2359lm 103lm/W CRI>80 6kg 45°C
L1303mm x W235mm x H95mm
LED, Opal Diffuser Temp Load Lum/lm Efficacy CRI Weight HT
D599-4-2000N-MW-CA 4000K 21W 2089lm 100lm/W CRI>80 8.5kg 45°C
D599-4-3200N-MW-CA 4000K 32W 3263lm 102lm/W CRI>80 8.5kg 45°C
D599-4-4100N-MW-CA 4000K 40W 4106lm 103lm/W CRI>80 8.5kg 45°C
L1603mm x W235mm x H95mm
LED, Opal Diffuser Temp Load Lum/lm Efficacy CRI Weight HT
D599-5-4000N-MW-CA 4000K 36W 4083lm 113lm/W CRI>80 10kg 45°C
D599-5-5900N-MW-CA 4000K 55W 5939lm 108lm/W CRI>80 10kg 45°C

HT Applies for standard version. For any options please check with technical sales.

Mission Class II contains a light source of energy efficiency class C (4000K) and class E (3000K).

Mission Class II LED Lifetime L70B10>110,000h (4000K), L70B10>100,000h (3000K) at 25oC ambient.

Mission Class II Driver Lifetime up to 100,000h at 25oC ambient.

Fitting Options

Matt silver Replace -MW with -MS
Class II with surge protection & in-rush current limiter Replace -CA with -CB
Class II with surge protection Replace -CA with -CC
Class II with in-rush limiter Replace -CA with -CD
Emergency luminaire monitoring module (CEAG)* Add suffix -EC
DALI Add suffix -DA
Warm white LEDs (3000K) Replace N with W

*Note:

-EC option not compatible with -CB or -CD options.
-EC option is only available on the following versions:
GD599-4-2000N-
GD599-4-3200N-
GD599-5-4000N-

Mission Polar Curve
MISSION-LINEAR-CATALOGUE-DRAWINGS
Tel: 020 8254 2000  |  Fax: 020 8644 4253  |  Email: sales@designplan.co.uk  |  Web: designplan.co.uk
Designplan Lighting Ltd. 16 Kimpton Park Way, Sutton, Surrey, United Kingdom, SM3 9QS

Registered in England No. 784246